Skip to main content
All CollectionsGetting the best out of my brsk services
How to Set Up a Guest Network on the TP-Link Router
How to Set Up a Guest Network on the TP-Link Router

Instructions on setting up a guest network using Aginet app and the web interface, and securing the network and sharing access​

V
Written by Vicky van Niekerk
Updated over 4 months ago

Setting up a guest network ensures visitors have access to the internet without compromising your main network’s security. Here’s how to do it:

Using the Aginet App:

  1. Open the Aginet App:

    • Ensure your mobile device is connected to the TP-Link router and open the app.

    • Complete the initial setup if you haven’t already.

  2. Create a Guest Network:

    • Tap “More” in the bottom right corner, then select “Guest Network.”

    • Create a secure password for your guest network.

    • Optionally, share the network details via QR code or change the SSID (network name).

Using the Web Interface:

  1. Log into the WebUI:

    • Open a web browser and navigate to 192.168.0.1, then enter your router password.

  2. Enable Guest Network:

    • Click “Guest Network” on the right-hand side and tick the “Enable Guest Network” box.

    • Customize the SSID and password.

  3. Additional Security:

    • Optionally, enable client isolation by ticking “Allow Guests to Access Each Other.”

  4. Save Your Settings:

    • Click “Save” to activate your guest network.

This article was written with assistance from OpenAI's ChatGPT, a language model trained on diverse datasets to provide comprehensive information and support.

Did this answer your question?